NC Slitter And Cutter With Stacking For Two Layers Single Facer
Paperboard
Function
Machine configuration: helical cutting knife,5 Group of φ200 thin
slitting blade.
Slitting and Cutting Section
1. Storing 200 sets of orders, man-machine interface, the screen
displays information, reviewing, modifying, adding and canceling
orders at any time.
2. Germany KEB servo system control the motor driving,and
high-performance synchronous servo motor
3. The cutting machine adopts the inlaid steel helical knife
structure, and the hard-toothed grinding gear realizes no backlash
transmission, with high precision and long service life.
4. The machine base and wallboard adopt gray cast iron, with high
strength and strong vibration resistance.
Thin Blade Section
1. Adopt thin tungsten steel alloy blade, with sharp blade and
service life of more than 8 million meters.
2. High-quality imported industrial computer and high-performance
PLC constitute the upper and lower.
Computer control system
1. Grinding knife by computer controlled automatic or manual with
non-stop machine, improve production efficiency.
2. Fast changing orders in 3-8 seconds.
3.Imported synchronous belt driving device,accurate precision, long
service life and low running noise.
Stacking Section
Adopt Basket down stacking, the paperboard automatically output
after reach setting quantity,conveying section is discharged in
three: Cardboard straight output no curve with brush design.The
buffer in length. Counting and pneumatically separation.
Technical Parameter
Working Width | 1600mm |
Design Speed | 180m/min |
Working Speed | 150m/min |
Cutting Length | 300mm-9999mm |
Cutting accuracy (Uniform Speed) | ±1mm |
Upper and Lower knife Shaft Dia | φ200mm |
Main Driving Motor(Servo) | 12.5KW |
Holding Paper Motor: (Frequency Control) | 3KW |
Paper Feeding Motor(Frequency Control) | 1.5KW |
Horizontal output (Frequency Control) | 0.75KW |
