Corrugated Automatic Sheet Paper Cutting And Rewinding Machine
Sumarrize
The slitter is used to cut all kinds of drum materials. The machine
is equipped with a round knife and a straight knife to cut
different materials respectively. Through cutting narrow width
materials and materials with different difficulties, the slitter is
divided into surface winding and center winding, and longitudinal
cutting is adopted.
Equipment features
1. Centralized panel operation, integrated circuit control. All
parts of the machine are centralized in panel operation control.
2. Main functions of the panel: A. spindle speed adjustment B.
winding length setting C. unwinding tension adjustment D. winding
tension setting E. start. Stop button.
3. The cutter adopts upper and lower round cutters. The lower
cutter pad can be changed according to different cutting width, and
the cutting width can be adjusted to achieve high quality cutting
quality.
Principle
1. The paper Slitter shall cut the whole roll or the whole sheet of
raw materials with fixed length, such as plastic packaging
materials, packaging cartons, steel plates, films, leather, wood
chips, etc., which shall be controlled by fixed length slitting.
2. The cutting length can be set continuously. If there is any
error in the actual cutting length, it is easy to calibrate by
setting parameters.
3. The slitting control of the paper Slitter is divided into static
and dynamic slitting: stop the machine accurately when the set
length reaches, then static slitting processing, restart the
operation after slitting; when the set length reaches, send the
slitting signal without stopping, and the slitter will conduct
dynamic slitting processing in the process of material movement.
Technical parameter
| Parent roll width | 1600mm |
| Parent roll diameter | 1200mm |
| Rewind diameter | 1200mm |
| Slit width | >30mm |
| Paper model | 80-600g |
| Power | 11kw |
| Paper on the way | Hydraulic |
| Brake | Duble pneumatic |
| Host speed | 1400r/min |
| Speed | 350m/min |
| Operator | 1 |
